AP-23 Lini Gold

Natural Philippine capiz shells are cut into thin laminate and mounted to polymer propylene substrate to create decorative panels.  The panels shimmer with the natural colors of capiz, and can be used as an accent for walls, cabinetry, and furniture.  Laminate panels are suitable for dry applications, but due to their delicate nature, they shouldn’t be used in areas of direct sunlight or high moisture such as a kitchen or bathroom.  Panels are available in 12”x12” and 12”x24”.

Material: Natural Capiz Shells  

Size: 8 cm x 60 cm x 0.5 cm/   60 cm x 120 cm x 0.5 cm / 60 cm x 240 cm x 0.5 cm   

Usage:Interior Wall Coverings, Furniture Surface Material, Aesthetic Applications

Limitations:Not applicable for areas with direct sunlight and with high moisture such as kitchen and bathroom.

Installation: Using vinyl- over- vinyl (VOV) adhesive. Being extra careful at its edges, apply an even coat of adhesive to the product. Allow installed tiles to dry for 5 to 8 minutes. To ensure the installation, airgun the bigger size capiz tiles airfgun the ucker the adhesive. Immediately wipe off excess paste with a soft damp cloth and dry with a clean soft cloth afterwards. The extra adhesive on the surface of capizd can be cleaned by damp cloth, use dilute alcohol on the soft cloth and wipe it off.

Cutting and Repair:Trim with cutting machine. (To avoid damage, capiz surface must be face-up when cutting.)Slight irregularities on the edges can be remedied by gentle hand sanding of edges with a Sanding block or finer sandpaper, then apply a polyurethane coat to seal it. (Always test on scrap materials before applying on any given installed surface.)

Seams:If gaps occur at the joints of tiles, use similar color latex caulk on tiles. Any excess filler/caulk must be removed immediately. The area must then wash down with soapy water to remove any residue. Wipe it off but avoid scratching the surface.

Tools: cutting machine. Air-gun tucker. Flat surface working table. Vinyl over vinyl or non-water based adhesive, polyurethane coat, latex paintClean cloth.

Price: Per square foot.

Call (316)-361-0803 or email sales@globaltrendsus.com to place your order today!